
PenMount for Ubuntu 7.10

=======================================================================
 Overview
=======================================================================
  The following versions of Ubuntu has been tested.

  Ubuntu           Linux kernel             X window
  -------------------------------------------------------------
 
  7.10             2.6.22-14.generic        X Window System 1.3.0


  The following control board was supported.

  Control Board                 Port            Description
  --------------------------------------------------------------
  PenMount 9000 series	        Serial          19200/9600 bps
  PenMount 5000 series          USB             low speed

  PemMount 6000 series          Serial          19200/9600 bps
                                USB             full speed

=======================================================================
 Quick Install
=======================================================================
  1. Login as user in ubuntu login prompt

  2. Change directory
     $ cd pmlinux-ubuntu

  3. Install
     $ sudo ./install.sh

  4. Reboot

=======================================================================
 How to Calibrate PenMount
=======================================================================
  1. Login as user

  2. Change directory
     $ cd pmlinux-ubuntu

  3. run gCalib
     $ sudo ./gCalib 4
     4 is the calibration number.
     Available calibration numbers are 0, 4, 9, 16, 25.

  5. Do calibration
     Touch the red points appear on screen until calibration process complete.

  6. After the calibration complete, the parameters are stored in the following location :
     /etc/penmount.dat.



PenMount
Febuary 28, 2008

